The Honda Accord is a popular sedan in the US. But owning the older models will need regular maintenance, including routine oil changes and using the correct oil type. Do you own a 2014 Honda Accord? Then you must know about the 2014 Honda Accord oil type too!
What type of oil does a 2014 Honda Accord take?
The company recommends using OW-20 fully synthetic oil for extended performance. This type of oil was specially formulated to satisfy the requirements of Honda engines. The oil provides better lubrication, wear prevention, and fuel efficiency.
If you’re a Honda car owner, you must choose an oil with the highest quality that fulfills the company’s requirements. Proper oil changes and maintenance based on the carmaker’s recommendation are the best way to prolong your car’s lifespan.
What type of oil does a 2008 Honda Accord use? Know the answer!
Does the 2014 Honda Accord need full synthetic oil?
The 2014 Honda Accord oil type should be fully synthetic OW-20 oil. Though you can use traditional oil for your Accord, synthetic oil improves engine performance and extends the time between oil changes.
How can you choose the correct 2014 Honda Accord oil type?
Picking the correct oil type will be crucial for your car’s longevity. These are some factors that can influence your decision.
- Your car’s age
- The number of miles you drove
- Your driving style
- The climate in the area where you live
You can use conventional oil if the 2014 Honda Accord remains new and you haven’t driven too many miles. But we recommend using high-mileage oil for cars driven more than 75,000 miles. For those who need the advantages of synthetic oil at a lower cost, the synthetic blend is a great option.
Synthetic oil might be the best choice if you live in a place with extreme temperatures or continuously drive through stop-and-go traffic. This oil can withstand high temperatures and increase your car’s fuel efficiency.
How often does a 2014 Honda Accord need an oil change?
Along with choosing the correct 2014 Honda Accord oil type, it is important to do oil changes on time to maintain your car’s performance. For conventional oil, Honda advises replacing your 2014 Honda Accord’s oil and filter every 3,000-5,000 miles. However, if you use synthetic oil, it needs replacement every 7,500-10,000 miles.
Know the 2010 Honda Accord’s oil type!
How much oil does the 2014 Honda Accord take?
The oil capacity depends on your car’s engine type.
- Suppose you own a Honda Accord with a 2.4L 4-cylinder engine. Then, the oil capacity will be 4.4 US qt with oil filter replacement and 4.1 US qt without filter replacement.
- The 2014 Honda Accord with a 3.5L V6 engine can hold 5.3 US qt of oil with a new filter and 5.0 US qt without a filter.
The oil quantity mentioned above applies if you drive in typical driving conditions. But the capacity will decrease if you drive in extreme conditions like dust or severe temperature for long without routine oil changes. Getting help from a qualified mechanic or the dealership is vital if you’re unsure of your car’s oil capacity or the recommended oil type.
How to do an oil change in your Honda Accord
Follow these steps to do the oil change in your car.
- Ensure the engine is running cool and parked on a level area.
- Locate the cap that fills the oil on the top of the car’s engine.
- Find the oil drain plug. Place the oil drain pan underneath.
- Wrench out the drain plug and let the old oil drain.
- After draining the old oil and replacing the drain cap, tighten it to the necessary torque.
- Locate the oil filter. Use a wrench to remove it.
- Clean the replacement filter gasket with oil, then manually install it and tighten it to the appropriate torque.
- Fill the engine with the right oil and quantity.
- Then replace the cap that fills the oil. Start the engine and let the new oil circulate for some time.
- Turn off the ignition and check the oil level with the dipstick. Add oil if required.
Does viscosity impact the 2014 Honda Accord’s oil capacity?
Yes. Using the oil with the right viscosity lubricates and protects engine parts. The engine type determines the oil capacity, and the company recommends an exact viscosity oil grade for engine performance. Using an oil with a lower viscosity level than recommended for your car may not protect the engine in severe conditions, causing engine wear.
Oil with a higher viscosity than recommended can also prevent oil flow and lubrication. Use the recommended oil type and viscosity grade for your 2014 Honda Accord for the best performance and engine protection. Also, ensure to follow the recommended oil change intervals.
Here’s all the info on Accord 2023 model!
Can I use 5W-20 instead of 0W-20?
Yes, it’s okay to use both. 0W-20 oil improves engine protection when starting up in harsh winters. But you should always follow the instructions in your owner’s manual to choose the correct oil type.
Our awesome app offers huge savings on all the car services you need in one app! We help you find the best parking, EV charging, and car washes near you! We also provide the best gas discounts, auto insurance, home insurance, and auto refinance!