You could be the safest driver in the world, but dents on a car are still inevitable. Multiple circumstances can cause dents on your car. For example, it could be because of your own mistake, due to a careless fellow driver on the road, or a football that kids in your neighborhood threw. As long as the damage is not massive, you can fix the dent yourself and save a few bucks in the process. Here’s everything you need to know about how to fix a dent in a car. Keep reading to know more.
Here’s a list of methods you can employ to remove dents from your car:
Using a plunger
Yes, you read that right. Using a plunger, you can fix minor dents in your car. The dent removal process using a plunger is pretty straightforward. First, splash some water on the dent and plunger. Then, push the plunger on the dent and pull it out. Repeat the process till you fix the dent.
Note: For this process, use only the plunger used for sinks, not the ones used for toilets. Also, make sure the plunger is clean before using it.
Using a hairdryer and compressed air
A hairdryer and compressed air are fantastic household products that can be used to remove dents from plastic material in your car. Heat the dent using the hairdryer. Set the hairdryer temperature to the highest.
The plastic will expand due to the heat from the dryer. After some time, use a can of compressed air, and spray it on the dent. The cold air from the can will not contract the plastic, and the dent will pop out.
Use hot water and cold water
Using hot water, you can easily remove dents on a plastic bumper or other plastic materials in your car. Pushing a dent out of stiff plastic is very difficult, and this is precisely where hot boiling water can help you.
Pour the boiled water on the dent. Next, reach behind the bumper and pop the dent out. If you’ve difficulty reaching the dent, remove the bumper to do it. Finally, pour cold water on the bumper to cool it and fix the area.
Using hairdryer and cool water
You can employ the same technique that was used on plastic to metals. It is no secret that metals expand when heated and contract when you cool them. Now use the hairdryer on the dented part on the metal. Again, set the temperature to maximum. After a few minutes (10-15 mins), pour cold water onto the panel. For best results, repeat the process three to four times.
Use a DIY dent removal kit
If you don’t trust household products, you can always invest in a DIY dent removal kit to get the job done. Visit an automobile repair shop near you to purchase the kit and follow the instructions inside it to remove the dents.
How to fix a dent in a car – Frequently asked questions
Can all car dents be removed?
This depends on the kind of damage. Almost all minor dents can be removed using DIY techniques, or professionals can help you. However, major dents with cracks can be pretty complicated to fix.
How to remove dents from your car’s bumpers?
Use a hairdryer and compressed air to fix dents on car bumpers and other plastic parts. Use the dryer on the dent, and follow it up using compressed air to remove the dent.
How much does it cost to fix a dent in your car?
The total cost to repair a dent can range from $50 to $2000, depending on the size of the dent and its location. Minor dents can be fixed using the DIY technique. However, we recommend visiting a professional car mechanic for major dents to fix the issue.
Here’s more info on top-rated airport parking, the best parking spots in your city, the most affordable insurance for your car, and top-rated car washes near you.
