Looking to paint your wheel rims black? You can save bucks by doing it yourself at home. Here’s our step-by-step guide on how to paint your rims black.
If you’re a car enthusiast, you already know how popular black rims are. For the uninitiated, black rims have a huge fan base and are a head-turner. If you’re on the mission to make your car look cool and stylish, then black rims are the way to go. No matter what size your car is, black rims on your vehicle can never go wrong. So, if you’re looking to paint your rims black using DIY techniques, you’ve arrived at the right place. In this post, we’re explaining how to paint your rims black. Keep reading to know more.
How to paint your rims black
Follow our step-by-step guide and learn how to paint your rims black.
For best results, we recommend removing the wheels. That’s because you can end up applying the pain unevenly if you don’t remove the wheels from the vehicle. Use a jack, lug wrench, and jack stand to remove the wheel from the base.
Separate the wheel from the tire. By removing the wheel from the tire, you can avoid spraying paint. If you’re looking to paint only the face of the wheel, then you can leave it as it is.
You need to first clean the wheel before painting them. After removing the wheel, clean it with a high-quality wheel cleaner. First, rinse the wheel with water, then apply the wheel cleaner. Now, use a soft brush scrub and remove the dirt and grime. Finally, rinse it off with water and dry it using a microfiber towel.
After cleaning the wheel, you will now see the scratches and bumps in it. If they are mild, you can skip this step. However, if they are deep, use sandpaper and water to smoothen the surface. Use 300-grit sandpaper and water and sand the entire wheel. Next, use 500-grit paper and repeat the same step.
Once you’re done sanding the wheel, run your finger over it, you should be feeling a smooth surface. Now spray water over the wheel and dry it with microfiber towels.
Wear a protective glass and gloves to safeguard yourself. Next, choose a dust-free place with ventilation to paint. Place the wheel on the floor or the wall and begin the painting process.
Now tape the outline of the rim. The portion inside the tape is what you’ll be painting. Using plastic wrap, cover the entire wheel. Cut out the center of the plastic – the spot you’ll be painting – using a razor or knife. The others parts are protected from overspray.
Before painting, you need to apply primer to the wheel. You should be applying two or three coats of primer and follow the duration between each coat as per the instructions on the product. The primer will protect your wheel from rusting and make the paint look even across surfaces.
The actual painting process begins now. Shake the paint well and start spraying it on the wheel. Like the primer, you’ll be applying multiple coats of paint. Spray the paint back and forth at a consistent pace. Don’t leave any gap. You should wait and allow the paint to dry before applying the next coat. Two thin coats followed by a thick coat should get the job done.
Once you’re done painting, check the wheel and allow it to dry. Follow the same steps to paint other wheels.
Read our blogs for information on the best airport parking and hourly parking spots near you and the most affordable insurance for your car.