Do you want to remove cement stains from your car? No matter how careful you drive, cement stains from construction sites and other places somehow get stuck on your car’s body. Removing the cement from your car is no simple task, and you need the right techniques and patience to remove it without any scratches. Use our step-by-step guide on how to remove cement from a car for a hassle-free cleaning process.
How to remove cement from a car?
Follow the steps given below to remove the cement statins from your car’s paint:
Use masking tapes and cover the stained area to prevent any overspray. You can cause damage to the car’s paint by over-spraying the cleaning solution on other spots. Remember not to use duct tape, as it can cause paint damage. If there is more than one spot to clean, cover them all before beginning the next step.
In this step, you need to dissolve the cement. You can use a special cement dissolver or a vinegar solution to dissolve it.
Cement dissolver: You can get a specialized cement dissolver in your local hardware store or purchase it online. The cleaning solution will dissolve calcium from the cement stain, which can be easily removed.
Vinegar solution: Vinegar is another great option to remove cement stains. What’s more, it’s affordable too. Fill a spray bottle with equal parts of white vinegar and lukewarm water. Mix the water and vinegar thoroughly for a few minutes. The acidic nature of the vinegar will dissolve the cement stains effectively and make them easier to remove.
Now either spray the cement dissolver or vinegar solution onto the stain and let it sit for a few minutes. Make sure to cover the stain with the solution. This will loosen the cement.
After letting the solution soak the cement for a considerable amount of time, it’s time to scrape it. Use a plastic or wooden spatula and cover it with a cloth to scrape the cement. Don’t apply too much pressure, do it gently.
To remove the remaining thin layers of cement, use the cleaning solution and a piece of cloth. Spray the solution onto the spot again and hold the cloth against the cement stain for a few minutes. Repeat this process till you get rid of the stain.
Note: Don’t rub the stain using the cloth. You can cause serious paint damage.
Use a clay bar to lift the remaining grains and debris. Wet the area using water or lubricant and use the clay bar. Follow a circular motion to lift off the debris. Follow the steps mentioned above to remove other cement-stained spots in your vehicle.
Once you’re done with the steps mentioned, it’s time to wash and wax your car. If you’re looking for the best car washes near you, Way.com is your best bet. Use the Way.com app or website, book a car wash near you and wash your vehicle for the lowest possible price.
Frequently asked questions
How to remove cement from a car windshield?
If you’re windshield and windows have cement stains on them, use the vinegar solution and a damp sponge to remove them. Spray the vinegar solution on the stain and wait for 10 to 15 minutes. Now using a damp sponge, wipe it.
Does vinegar dissolve concrete and cement?
Vinegar is a great option to remove cement stains. Vinegar is acidic and will dissolve concrete and cement stains effectively.
Can I use cement to remove cement stains?
Yes, you can use a concentrated solution of salt and water to remove cement stains. Dip a paper towel into the salt solution, place it on the stain, let it stay for a few minutes, and then scrape the cement.