×
Get 5% off in-app
400k+ download
Open app

How to Use a Clay Bar in Car Detailing

  • Car Wash
  • Renee Martin
  • 3 minutes

Spread the love

There’s no doubt that a clay bar treatment is an important process in both car wash and car detailing. What’s more, car detailing experts use clay bars to remove the deeply embedded dirt, dust, bug splat, road tar, and other contaminants off the car’s exterior. In this post, we’re breaking down the process of how to use a clay bar in car detailing. Keep reading to know more.

This blog has been updated on June 1, 2021.

GET TOP-RATED CAR WASHES HERE

What is a clay bar treatment?   

Clay bar treatment is the process of using clay to remove contaminants like road tar, brake dust, and other harmful substances from the car’s body. The build-up of these contaminants over time can ruin the car’s finish; most of these contaminants are corrosive and can cause rust spots on the car’s exterior. Regular visits to an automatic car wash near you can help eliminate these contaminants. However, after a car wash, a clay bar treatment can complement the cleaning process and give a glossy sheen to the car. What’s more, clay bars are non-abrasive and do not damage your car’s paintwork or clear coat.¬† ¬†¬†¬†

How to Use a Clay Bar in Car Detailing

How to use a clay bar in car detailing ‚Äď a step-by-step guide¬†¬†¬†

Materials Required    

  • Clay bar or clay bar kit¬†¬†
  • Microfiber towels¬†¬†
  • Detailer spray or lubricant¬†¬†
  • Water¬†¬†
  • Bucket¬†¬†

If you’re trying out the clay bar treatment for the first time, we’d recommend using a clay bar kit. A clay bar kit contains clay bars, microfiber towels, and detailer spray or lubricants. A detailer spray or lubricant is used to stop the loose debris from scratching your car’s paint.¬† ¬†¬†¬†

Step 1    

Wash and dry your car thoroughly before you start applying the clay bar. The best car washes will remove all the loose contaminants stuck onto the car’s body and will make the claying process easier.¬† ¬†

Step 2   

Next, spray the lubricant or detailer spray onto a small area. Use the clay bar ‚Äď cut it into 3 to 4 pieces instead of using one full bar ‚Äď and gently glide it on the surface where you have sprayed the lubricant. Make sure you glide it in a back-and-forth motion and not in a circular motion. Your clay must now smoothly glide on the lubricated area. Now repeat the same process in other areas of the car.¬† ¬†¬†¬†

How to Use a Clay Bar in Car Detailing

Step 3    

Regularly check the status of the clay. If you notice dirt on the clay, switch to a fresh side or use a new piece. You don’t want to rub the dirt back onto the car’s exterior by using a dirty clay bar.¬† ¬† ¬†

Step 4    

After you’re done claying a section, wipe it down using a microfiber towel. You can also use the lubricant to remove any residual clay from the car’s body.¬†Once you’re done with the claying process, slide your fingers across the car’s exterior; if you find any rough spots, re-clay the spot/spots again.¬† ¬†¬†

FIND THE BEST CAR WASHES HERE

If you’re looking for an automatic car wash near you that offers a professional and hassle-free car wash experience, then look no further than Way.com. Websites and apps like Way.com offer professional and top-rated car wash services at great prices. What’s more, the whole family can get in on the sudsy action thanks to¬†Way.com’s¬†Carwash Voucher and Family Car Wash Pass that can be used on multiple (that’s right,¬†multiple) vehicles!¬†

Car Wash Banner

Read our blogs for information on the best airport parking and hourly parking spots near you and the most affordable insurance for your car.

Related Posts

wave

Press ESC to close