It is fun to drive on a newly-paved road – the wind on your face, a vast horizon welcoming you, and some great music in your car – sure does feel like a dream – or maybe not! Driving through a newly paved road increases the risk of tar getting stuck in your car’s wheel and body – a car owner’s nightmare. You don’t need to fret, though. In this post, we introduce you to pro car wash tips you can employ for tar removal. Read on to know more.
What Is Tar?
Tar is a sticky, black, oil-based material that is used for paving roads. While driving, it can get stuck in the car’s wheel wells, undercarriage, around the side doors, and various other parts of the vehicle. The tar that gets stuck on the wheel can be sprayed onto other parts of the car when you drive. If left uncleaned, the tar spots can ruin your car’s paintwork. What’s more, once it dries and hardens, it becomes tough for car owners to have it removed.
Pro Car Wash Tips for Tar Removal
Materials Required
- Microfiber towels
- Bucket
- Hose
- Tar remover
Step 1
Begin your cleaning process by rinsing the car before you start scrubbing the car. Do not worry about the tar spots still being there after a rinse. They are hard substances and require more than just water to be removed.
Step 2
Start by applying the tar remover to the microfiber towel. If you’re looking to clean a large area, you can apply some tar remover directly to the area you’re planning to clean.
Step 3
Now wipe the cleaning area with the tar cleaner while applying light pressure. Be careful not to apply a lot of pressure. If you notice the towel getting dirty, switch to a fresh side or use a new towel. It is never a good idea to rub the dirt back onto the car’s body.
Step 4
We’d recommend that you divide the sections with tar spots and start working on one section at a time. By doing this, you won’t miss out on any spots. After you’re done with the cleaning process, give the car a once-over to check if you’ve covered all the spots.
Step 5
Finally, wash your vehicle thoroughly to get rid of all the residue and dry it with a microfiber towel. Car wash industry experts recommend waxing to protect your car from tar spots and make it look great.
Tar Removal – Common Queries
Yes, over time, the tar can damage the car’s paintwork. What’s worse, it can also cause discoloration if left uncleaned. The faster you remove it, the lesser the damage on the car’s exterior.
There’s no way that you can prevent tar from sticking to your car. However, according to car wash experts, waxing and other preventive measures can make the cleaning process easier.
We’d recommend that you use a high-quality tar remover to get rid of the tar spots. Some car owners also use WD-40 and peanut butter (we swear this is legit!) for tar removal. You can make use of the Way app to get the best car wash services near you at the best rates.
Renée Martin is a travel and car expert who focuses on road and air travel in the U.S. For the past 6 years, she’s been helping make driving and trip planning easier and budget-friendly for everyday travelers.
